Pioneer BDP-09FD Service Manual page 16

1
[3] Front Panel Display
A
1
Lights during playback.
2
Lights when playback is paused.
B
3 LAN
Lights when there is an active local area network (LAN) connection.
4 PQLS
Lights when the PQLS function is activated.
[4] Rear Panel
C
D
1 AUDIO OUT (7.1 ch) terminals
Connect with the multi-channel (7.1- or 5.1-channel) audio input
terminals on an AV receiver or amplifier, etc..
To connect to the 2-channel audio input terminals on a TV, etc.,
connect to FRONT (L/R).
2 AC IN
Connect the power cord here.
3 VIDEO OUT terminals
VIDEO – Connect with the video input terminal on a TV, AV
receiver or amplifier, etc..
S-VIDEO – Connect with the S-Video input terminal on a TV, AV
E
receiver or amplifier, etc..
COMPONENT VIDEO (BNC jacks) – Connect with the
component video input terminals on a TV, AV receiver or
amplifier, etc..
4 RS-232C terminal
This terminal is not used.
5 HDMI OUT terminals
MAIN (KURO LINK) – Connect with an HDMI-compatible TV, AV
receiver or amplifier, etc..
SUB – Connect with an HDMI-compatible TV, projector, etc..
This terminal outputs linear PCM 2-channel audio signals.
Do not connect an AV receiver or amplifier to this terminal.
F
Also note that the KURO LINK function will not work for
devices connected to this terminal.
16
1
2
5 Character display
Displays the title/chapter/track number, elapsed time, etc.
6 24HZ/50HZ/60HZ
The frequency of the video frame or field being output lights.
7 CONTROL
Lights when the KURO LINK function is activated.
8 HDMI 1 2
HDMI 1 lights when VIDEO SELECT is pressed and the HDMI OUT
(MAIN) terminal is selected. HDMI 2 lights when the HDMI OUT
(SUB) terminal is selected.
6 DIGITAL OUT (COAXIAL/OPTICAL) terminals
Connect with the digital audio input terminal on an AV receiver or
amplifier, etc..
7 LAN (100) terminal
Ethernet port for 100BASE-TX (100 Mbps) network connection.
8 CONTROL IN terminal
Use to control this player from the remote sensor of another Pioneer
component with a CONTROL OUT terminal and bearing the
mark. Connect the CONTROL OUT terminal of the other component
to CONTROL IN on this player using a mini-plug cord (commercially
available).
Caution
• Be sure to connect cables for outputting the audio and video
signals.
• When connected via System Control, point the remote control
toward the connected component (such as an AV receiver or
amplifier). The remote will not work correctly when pointed at
this player.
• You cannot use System Control with components that do not
have a System Control terminal or with components
manufactured by companies other than Pioneer.
BDP-09FD
2
3
3
4
4