Each Setting And Adjustment; Necessary Adjustment Points; Firmware Update - Pioneer BDP-09FD Service Manual

1

8. EACH SETTING AND ADJUSTMENT

8.1 NECESSARY ADJUSTMENT POINTS

A
Note : Be sure to update the firmware before starting adjustments or settings.
When
Exchange Parts of Mechanism Assy
Exchange the DRIVE ASSY
B
Exchange PCB Assy
MAIN ASSY
Exchange
C

8.2 FIRMWARE UPDATE

UPDATE PROCEDURE
After the DRIVE or MAIN Assy is replaced, be sure to update the firmware before starting any adjustment/setting.
1 . Plug a power cable into the unit.
D
2. Press the "STANDBY/ON" button to switch the unit on.
3. Press the "OPEN/CLOSE" button to open the disctray.
4. Place an UPDATE disc on the tray.
5. Press the "OPEN/CLOSE" button on the front panel to begin the application update.
* FL display indicates "DL OK" and the unit automatically switches into standby with the tray
opening.
* The update time takes 5 to 30 minutes, it changes depending on the version.
DO NOT unplug the power cable or press the standby button until
the unit switches into standby mode.
E
6. Remove the UPDATE disc from the tray.
7. Press the "STANDBY/ON" button to switch the unit on, and check if FL display indicates "DL OK".
F
The update is completed if FL display indicates "DL OK".
58
1
2
If you do not, the screen for the subsequent settings will not be displayed.
Mechanical
Mechanical
BDP-09FD
2
3
Adjustment Points
None
•
point
FIRMWARE UPDATE
Electric
•
point
ID NUMBER and DATA SETTING
•
None
•
point
FIRMWARE UPDATE
•
Electric
ID NUMBER and DATA SETTING
•
point
MODEL SETTING
•
3
4
4