Pioneer BDP-09FD Service Manual page 40

1
A
[3] SERVICE INFORMATION DISPLAY
To display the first screen of the service information display, press the [ESC] then [DISP] keys.
You can check the destination and region number of the product and the version number of the firmware.
Before starting servicing, check the destination and region number of the product and check the version of the firmware to
be sure it is the latest.
• 1st screen (version data, etc)
1
00
2
01
3
02
4
03
5
04
05
06
B
6
07
7
08
8
09
9
10
a
11
12
13
14
15
16
1 Data on the model: Model name/destination
If the model name and destination are not set properly, the language may not be displayed properly.
Check that they are properly set.
C
2 MODEL: Model No.
3 VERSION: Release version
Check the version of the firmware to be sure it is the latest.
4 REVISION: SVN Revision No.
5 DRIVE: Data on the built-in drive
Drive name: Judged as OK: The name assigned by the application program coincided with that obtained by the command.
Judged as NG: The name assigned by the application program did not coincide with that obtained by the
DRIVE VER: Version of the firmware
D
Judged as OK: The version assigned by the application program coincided with that obtained by the command.
Judged as NG: The version assigned by the application program did not coincide with that obtained by the
DRIVE S/N: Drive serial No.
6 SUBCON: Firmware version of the submicrocomputer (PIC)
Judged as OK : The version assigned by the application program coincided with that obtained by the command.
Judged as NG+ : The version obtained by the command is newer than that assigned by the application program.
Judged as NG- : The version obtained by the command is older than that assigned by the application program.
7 REGION: Region codes for DVD-VIDEO and BD-ROM of the player
E The above screen example shows that the DVD region code is 1 and the BD region code is A.
If a region has not been set, "VIRGIN ROM" is displayed for the DVD, and "F" is displayed for BD.
8 CPRM ID: CPRM key No.
If it has not been set, "?????????" is displayed.
9 MAC ADDRESS: MAC ADDRESS value
If it has not been set, "?????????????????" is displayed.
a FPGA: FPGA version
• 2nd screen (OSD FILTER SETTING)
F
* For details on the OSD FILTER SCREEN, see the "[4] OSD FILTER SETTING".
40
1
2
command.
command.
BDP-09FD
2
3
3
4
4