Each Setting And Adjustment; Necessary Adjustment Points; Firmware Update - Pioneer BDP-320 Service Manual

1

8. EACH SETTING AND ADJUSTMENT

QQ
3 7 63 1515 0

8.1 NECESSARY ADJUSTMENT POINTS

A
Note : Be sure to update the firmware before starting adjustments or settings.
[1] Exchange Parts of Mechanism Assy
When
Exchange the DRIVE ASSY
B
*Note : After the DRIVE Assy is replaced, a region code must be written in it, by accessing from
the MODEL Setting screen (ESC, AMON, then TEST). Writing of a region code can be done only once.
[2] Exchange PCB Assy
When
C
MAIN ASSY
Exchange
TE
L 13942296513

8.2 FIRMWARE UPDATE

After the DRIVE or MAIN Assy is replaced, be sure to update the firmware before starting any adjustment/setting.
Note :
D
Update Procedure
1. Plug a power cable into the unit.
2. Press the "STANDBY/ON" button to switch the unit on.
3. Press the "OPEN/CLOSE" button to open the disctray.
4. Place an UPDATE disc on the tray.
5. Press the "OPEN/CLOSE" button on the front panel to begin the application update.
* FL display indicates "DL OK" and the unit automatically switches into standby with the tray opening.
E
* The update time takes 5 to 30 minutes, it changes depending on the version.
DO NOT unplug the power cable or press the standby button until the unit switches into standby mode.
www
6. Remove the UPDATE disc from the tray.
F
7. Press the "STANDBY/ON" button to switch the unit on, and check if FL display indicates "DL OK".
The update is completed if FL display indicates "DL OK".
44
1
http://www.xiaoyu163.com
2
If you do not, the screen for the subsequent settings will not be displayed.
Mechanical
Mechanical
If firmware updating is not performed after the MAIN Assy is replaced,
no image may be displayed on the screen.
x ao
y
. i
2
http://www.xiaoyu163.com
3
8
Adjustment Points
None
point
FIRMWARE UPDATE
1.
Electric
MODEL SETTING*
2.
point
ID NUMBER and DATA SETTING
3.
Adjustment Points
None
point
FIRMWARE UPDATE
1.
Electric
Q Q
MODEL SETTING
2.
3 6 7 1 3
point
ID NUMBER and DATA SETTING
3.
u163
.
BDP-320
3
4
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
4
9 9
2 8 9 9