Brother MFC-5860CN Network User's Manual page 21

IP Address
This field displays the current IP address of the machine. If you have selected a BOOT Method of Static, enter
the IP address that you wish to assign to the machine (check with your network administrator for the IP
address to use). If you have selected a method other than Static, the machine will attempt to determine its IP
address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be
incompatible with the IP address numbering scheme of your network. We recommend that you contact your
network administrator for an IP address for the network the unit will be connected on.
(For Monochrome Display models)
a
Press Menu, 5, 1, 2.
b
Select 1 to change. Enter the IP address.
c
Press OK.
d
Press Stop/Exit.
(For Colour Display models)
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
Press a or b to select TCP/IP.
Press OK.
d
Press a or b to select IP Address.
Press OK.
e
Press a or b to select Change.
Press OK.
f
Enter the IP address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the IP address. Press
c to enter the second three-digit number. Repeat this step until you have entered the fourth three-digit
number to complete the IP address. Press OK.
g
Press Stop/Exit.
Control panel setup
3
3
3
3
15