Brother MFC-5860CN Network User's Manual page 23

Gateway
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
(For Monochrome Display models)
a
Press Menu, 5, 1, 4.
b
Select 1 to change. Enter the Gateway address.
c
Press OK.
d
Press Stop/Exit.
(For Colour Display models)
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
Press a or b to select TCP/IP.
Press OK.
d
Press a or b to select Gateway.
Press OK.
e
Press a or b to select Change.
Press OK.
f
Enter the Gateway address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the Gateway address.
Press c to enter the second three-digit number. Repeat this step until you have entered the fourth three-
digit number to complete the Gateway address. Press OK.
g
Press Stop/Exit.
Control panel setup
3
3
3
3
17