Canon PRISMAsync v3.2 Technical & Service Manual page 89

step Action
Firmware upgrade; validation
5
As a first step a validation of the firm-
ware will take place.
Firmware upgrade; copy to HDD
6
After the validation the software is cop-
ied to the printer.
Normal download mode
7
As soon as all the software is copied, a
screen is displayed telling you to reset
the DIP switch.
Switch to Normal download mode
8
On the backside of the printer, Set the
DIP switch SW1 to 'OFF' (Lower posi-
tion).
PRISMAsync V3.2
Firmware upgrade of Engine and Accessories (safe download mode)
additional Info
Chapter 8 - Firmware upgrades via PRISMAsync
4
89