So-Dimm - Brother HL-2700CN series User Manual

SO-DIMM

We recommend that you expand the printer memory to avoid any MEMORY FULL errors.
The HL-2700CN printer has 64 MB of standard memory and a slot for optional additional memory. The
memory can be expanded up to a total of 576 MB by installing a commercially available SO-DIMM (Dual
In-line Memory Module).
The printer uses memory modules that are:
144 pins, no-parity, SDRAM with 64 MB or more.
The printer is not compatible with Extended Data Output (EDO) DIMM.
The following SO-DIMM sizes can be installed:
<US>
64 MB
128 MB
256 MB
<Europe>
64 MB
128 MB
256 MB
512 MB
For more information, visit Techworks web site at www.techworks.com
In general, SO-DIMM must have the following specifications:
Type:
CAS latency:
Clock frequency:
Capacity:
DRAM type:
The printer's standard memory can vary depending on the printer model and the country.
There might be some SO-DIMMs that will not work with this printer.
For more information, call the dealer you bought the printer from or Brother Customer Service.
For the latest information, visit the Brother Solutions Center at http://solutions.brother.com
4 - 13 OPTIONS
TechWorks
TechWorks
TechWorks
Buffalo Technology
Buffalo Technology
Buffalo Technology
Buffalo Technology
144 pin and 64 bit output
2 or 3
100 MHz or more
64 MB to 512 MB
SDRAM
12345-0001
12462-0001
12469-0001
VN133-64M
VN133-128M
VN133-256M
VN133-512M