2
Replacing the transfer roller
If you have the duplex unit installed, open the duplex back cover and the duplex inside unit first
before you open the back cover of the printer.
1) Turn off the printer power switch.
2) Open the back cover of the printer.
3) Release the transfer roller lock levers on the right and left-hand sides, and then lift the levers to
release the transfer roller.
4) Take out the transfer roller by gently pulling the right-hand side up and sliding the transfer roller
to the right.
Figure 5-25
Figure 5-26
Figure 5-27
ROUTINE MAINTENANCE 5 - 19