10
Clean the OPC belt cartridge and the OPC belt cartridge case with a dry cotton cloth.
11
Release the lock levers to remove the charging roller from the OPC belt cartridge.
Figure 5-44
12
Clean the area where the charging roller is to be installed with a cotton cloth.
13
Clean the surface of the charging roller with a cotton cloth.
Make sure you do not damage the brush of the charging roller.
Do not use volatile liquids such as thinner or benzene.
14
Put the charging roller back on the OPC belt cartridge.
15
To secure the charging roller, move the lock levers back to their original positions.
5 - 26 ROUTINE MAINTENANCE
Figure 5-43
Figure 5-46
Figure 5-47
Figure 5-45