Operating Precautions - Brother MPRINT MW-100 User Manual

Operating precautions

" " " " Operate this printer in an environment that meets the follow-
ing requirements.
!
Temperature: 32 – 104°F / 0 – 40 °C
!
Humidity: 20 – 80 %
(Maximum wet-bulb temperature: 80.6°F / 27 °C)
!
Do not operate or store this printer in a location exposed to
extremely high or extremely low temperatures, extreme
humidity, extreme dust, or extreme vibrations, otherwise
the printer may be damaged or malfunction.
!
Do not use the printer in a location exposed to extreme tem-
perature fluctuations, otherwise condensation may occur,
resulting in the printer being damaged or malfunctioning.
!
If condensation occurs, allow it to dry naturally before
operating the printer.
" " " " The AC adapter case and the printer may become hot while the
printer is charging or printing. This does not indicate a malfunction.
" " " " When the printer is not used, unplug the power supply plug
from the electrical outlet.
" " " " Do not block the paper output slot.
" " " " If the AC adapter connector or USB port becomes dirty, incor-
rect connection or incorrect charging may result. Periodically
clean the connector and port with a dry cotton swab.
" " " " When cleaning the printer, use a soft, dry cloth. Do not use
benzene or paint thinners, otherwise the printer may become
discolored or deformed. (
" " " " When using optional accessories, use them as described in
their instruction manuals.
" " " " Use thermal paper with this printer. If printed text is written
over or stamped, the text may disappear or become discol-
ored. In addition, it may take some time for the ink to dry.
" " " " Do not touch the printer with wet hands.
" " " " Do not leave paper cassette cover open when storing as this
may cause paper feed error or a paper sensor error.
→
Refer to page 13.)
Precautions
xi