Maintenance - Brother MPRINT MW-100 User Manual

Maintenance

Cleaning the printer
Cleaning the exterior of the printer.
1
Clean off any dust or other dirt from the printer by
wiping it with a soft, dry cloth.
If the printer is extremely dirty, wipe it with a cloth that has
been slightly dampened with water.
! Do not use benzene or paint thinners, otherwise
Cleaning the paper cassette sensor
If the paper cassette sensor is dirty, it will not be able to correctly
detect the paper cassette, and a malfunction may result. The
paper cassette sensor is located in the left rear of the paper
compartment as shown in the below diagram.
1
Turn off the printer and disconnect the AC Adapter.
2
Open the paper cassette cover and remove the paper
cassette from the printer.
3
Clean the paper cassette sensor with a dry cotton swab.
Paper cassette sensor
the printer may become discolored or deformed.
Operating Procedures
13