Advertisement
5. Slide the front bezel upward and pull out the 3 hooks from the holes to remove the bezel.
6. Confirm that three dust proof filter, two filter replacement sensor and the connecting
cable are installed correctly, as shown in the figure below.
Dust Proof Filter 1
Filter Replacement Sensor 1
7. Pass the cable into the server through the opening at the front side of the server.
As shown in the figure below, orient the connector longitudinally and pass it through the
opening.
Opening
Dust Proof Filter 2
Filter Replacement Sensor 2
Sensor Cable
29
Dust Proof Filter 3
Advertisement
