Notes: When placing a partially-used
How to Change the Cartridge
cartridge back in the machine, be sure
the material does not adhere to the
Remove the cartridge:
Insert a cartridge:
1
2
cartridge itself.
When removing a used cartridge
whose material has wrapped around
the rollers, remove the cartridge and
pull the material from the rollers.
The cartridge is properly installed when
the label is flush with the feed deck.
Close the top cover before using.
How to Change the Cutter
1
2
Snap the new cutter into place:
Unsnap the cutter:
When installed properly, the cutter slides
back and forth on the cutter bar.