Brother PR-600 Supplementary Manual page 5

The screen should appear as such:
Press the box with the "1"
Press the up arrow
Press the "Set" key
spool .
Press the box with the "2"
Press the arrows on the 4-way arrow pad
Press the "Set" key
spool .
Repeat these past steps of pressing the box with the numbers (3, 4, 5 and finally 6 when
appropriate), and then using the 4-way arrow pad
etc. color, and then press the set key
.
to select the dark gray box.
. You will notice that image of an "anchor" appeared over the #1
.
. You will notice that image of an "anchor" appeared over the #2
.
and select the second color created.
select the second, third, fourth,
5