Brother PR-600 Supplementary Manual page 9

software where certain colors of spools are placed. If the design were to be programmed
with the order of the needle bars 4-1-6-2-5-3, select the fourth color from the left, #1944,
use the arrow keys, then press the "set key" . Use the
keys, to select the next color to program. Program the colors, following the 4-1-6-2-5-3
order desired. You will notice that the first color is "1811", the second is "1622", and as
follows, "1833", "1944", "1955", & "1866". These numbers will appear in the box showing
the color that you selected. The last two digits of each number will help remind you of the
needle bar that you desire, with "11" representing needle bar "1", "22" representing needle
bar "2" and "so on".
Return to the first color programmed using the spool keys. The column
should appear as such:
Since the last digits shown are "44, 11, 66, 22, 55, 33", the needle bar order will be "4-1-6-
2-5-3". The screen should appear as such:
9