Preparing For Installation; Installation Accessories; Selecting Router Locations - ABB Tropos 4310-XA Installation Manual

Preparing for Installation

Figure 1
FIGURE 1

Installation Accessories

You must supply the following accessories:
Hardware to mount the router
Ethernet cable with M-12 connector to connect the router to the client device
Power cable with LEMO connector
Antennas and antenna cables

Selecting Router Locations

Tropos routers are radio devices, and as such, they are susceptible to common causes of
interference that can reduce throughput and range. Follow these general guidelines when
selecting an installation location:
Install the router away from other possible sources of WLAN interference at 2.4 GHz or 4.9
GHz.
Choose a mounting surface that is at least 13.25 inches by 8 inches to provide sufficient
space to screw the router into the surface
Tropos Mobile Mesh Router Installation Guide Models 4310-XA and 4319-XA
shows the mobile router unit and dimensions.
Tropos Mobile Router
(Figure 1). It is not necessary to level the router.
Chapter 1
6