Wlan Card; Removing The Wlan Card - Dell OptiPlex 7090 Service Manual

Steps
1. Place the SD-card reader onto the connector on the system board.
2. Install the two screws (M3x5) that secure the SD-card bracket to the system board and computer.
3. Reroute the cables through the routing guides on the SD-card reader bracket.
Next steps
1. Install the 2.5/3.5-inch hard-drive
2. Install the hard-drive and optical-drive
3. Install the front bezel.
4. Install the side cover.
5. Follow the procedure in

WLAN card

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5/3.5-inch hard-drive
5. Remove the hard-drive and optical-drive
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
caddy.
bracket.
after working inside your
before working inside your
caddy.
bracket.
computer.
computer.
Removing and installing components 35