Steps
1. Insert the coin-cell battery into its slot on the system board with the positive side (+) label facing up.
2. Press down and snap the coin-cell battery into the slot on the system board.
Next steps
1. Install the
graphics
card.
2. Install the
side
cover.
3. Follow the procedure in
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
2.5/3.5-inch hard-drive
4. Remove the
hard-drive and optical-drive
NOTE:
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the
components on the memory module.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
after working inside your
before working inside your
caddy.
bracket.
computer.
computer.
Removing and installing components
43