Silvercrest BTST-9300 Owner's Manual & Service Information page 53

Stereo blutetooth headset

Table of Contents

Available languages

Pairing with the Stereo Adapter

Pairing button

After a few moments, both devices will be synchronized and the alternate red and blue

indicator flashing will stop. Now only the blue indicators will blink three times at constant

intervals. This indicates that both devices are connected to a remote device. You have

successfully completed the pairing and will be able to listen to the audio source through the

headphones.

Note

The pairing between two Bluetooth devices is required only once. After the devices "know

each other", you only need to connect or disconnect them when you want to use them (see

page 12 – Using the Stereo Adapter).

Completing

the

headphones

To complete the pairing, press and hold the

pairing button (1) on the headphones. The

corresponding red and blue indicators on the

headphones will also flash.

pairing

the

Table of Contents

Chapters

Table of Contents