Charging The Batteries - Silvercrest BTST-9300 Owner's Manual & Service Information

Charging the Batteries

To charge the batteries connect the stereo headphones and the stereo adapter to the Y cable
(see figure). Next connect the power adapter to the Y cable and connect the power adapter to
Charger connector of
the stereo adapter
Charger connector of
the headphones on
left earpiece
Note
The first-time charging of the batteries requires approx. four hours, any future charging
cycles will require approx. two hours. A fully charged battery allows approx. eight hours of
operation and approx. 165 hours of standby.
Optionally, instead of the power adapter (6) you may also use the USB charger cable (4).
Notice to notebook computer users: Charging via the USB charger cable will discharge the
notebook battery faster.
8
a wall outlet. A red indicator will
illuminate on both device to indicate
the charging in progress. As soon
as the indicator stops lighting, the
charging cycle is completed. Then
you may disconnect all the cables
and pull the power adapter out from
the mains socket.
Y cable