Quick Start Function; Reviewing And Deleting The Last Scene Recorded - Canon DC330 Instruction Manual

Quick Start Function

QUICK START
When you press
camcorder enters the
In standby mode the camcorder
consumes only about half the power
used when recording, saving energy
when you are using a battery pack.
Additionally, when you press
QUICK START
again the camcorder is
ready to start recording within approx.
1 second*, ensuring you do not miss
important shooting opportunities.
* The exact time required until the camcorder
is ready to start recording may vary
depending on the shooting conditions.
1 QUICK START
Press
The standby lamp flashes at first
while the camcorder is preparing and
then stays on when it enters the
standby mode.
2
When you wish to resume
recording, press
again.
Within approx. 1 second, the
camcorder is ready to record.
NOTES
• When you wake up the camcorder from
standby mode, the following settings will
be changed automatically:
34 •
Video
the
standby mode.
( 22)
firmly.
QUICK START
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns to
automatic exposure.
- Zoom position returns to full wide
angle W.
• The camcorder will shut off if left in
standby mode for 10 minutes, regardless
of the [POWER SAVE] setting (
You can select the length of time until
shut-off with the [
setting ( 77).
To restore the power if the camcorder
shut off, turn the
MODE and release it, or turn the
camcorder off and then on again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
be woken up from standby mode.
- Open the disc compartment cover.
- Change the position of the
switch.
- Turn the switch toward MODE.
Reviewing and Deleting the Last Scene
Recorded
Even in
back the last scene recorded in order to
check it. If you are using a DVD-RW
disc, you can also delete the scene
while reviewing it.
1
If the joystick guide does not
appear on screen, press
display it.
77).
STANDBY OFF]
switch toward
/
mode you can play
( 22)
NEXT
to