Print Orders - Canon DC330 Instruction Manual

• If the message "BUSY" does not
disappear, disconnect the USB cable
and restore the connection after a short
while.

Print Orders

You can mark in advance the still images
you want to print and set the desired
number of copies as a print order. Later,
you can easily print out the print orders
by connecting the camcorder to a
PictBridge-compatible printer (
You can set print orders for up to 998
still images.
Selecting Still Images for Printing
(Print Order)
POINTS TO CHECK
Set the print orders before connecting
the USB cable to the camcorder.
FUNC.
( 23)
FUNC.
[ PRINT ORDER]
: The image selection screen
appears.
F
ROM THE IMAGE SELECTION SCREEN
1 Select ( ) the still image you
want to mark with a print order.
2 Press to set the print order.
The number of copies appears in
orange in the box next to the print
order symbol
3 Set ( ) the number of copies
desired and press
64 •
Photos
61).
( 22)
Press
.
.
To cancel the print order, set (
number of copies to 0.
4 Repeat steps 1-3 to mark
additional images with print orders
FUNC.
or press
menu.
Printing the Still Images Marked with Print
Orders
FUNC.
( 24)
1
Connect the camcorder to the
printer using the supplied USB
cable.
Refer to PC Connection Diagram
( 68).
2
Open the print settings menu.
FUNC.
[
[ PRINT]
The print settings menu appears.
The error message "SET
ORDER" appears if you connect a
printer with direct print function and
select [ PRINT] without having set
any print orders beforehand.
3
Select ( ,
press .
Printing starts. The print settings
menu disappears when the printing is
completed.
NOTES
• Depending on the connected printer, you
can change some print settings before
step 3 ( 61).
• Cancel Printing/Printing Errors (
• Restarting Printing: Open the print settings
menu as explained in step 2. In the print
settings menu, select [RESUME]* and
) the
twice to close the
( 22)
MENU]
PRINT
) [PRINT] and
63).