Lcd Video Light; Self Timer - Canon DC330 Instruction Manual

image, but the image quality may be
lower, and the autofocus may not work
well.
- The image may flicker when recording
with fast shutter speeds.
- Recording movies under fluorescent lights:
If the screen starts to flicker, select
[ SHUTTER-PRIO.AE] and set the
shutter speed to 1/100.

LCD Video Light

You can use the LCD video light to
record in completely dark places. For a
brighter picture, we recommend
keeping a distance of about 20 cm -
60 cm (8 in. - 2 ft.) from the subject and/
or using the [ NIGHT] recording
program. When you activate the LCD
video light, rotate the LCD panel to face
the subject and use the viewfinder
instead ( 31).
FUNC.
( 23)
FUNC.
[ LCD LIGHT OFF]
[ LCD LIGHT ON]*
Press
FUNC.
* Using the viewfinder, select [
OFF] instead to turn the LCD video light off.
Closing the LCD panel will also turn the LCD
video light off.
The LCD display turns entirely white
when used as the video light. Use the
viewfinder instead.

Self Timer

POINTS TO CHECK
pause mode.
FUNC.
( 23)
1
Activate the self timer.
FUNC.
[
[SELF TIMER]
2
Press
•
• Set [SELF TIMER] to [
3
Press
start recording.
( 22)
• The camcorder starts recording
• You can also press
LCD LIGHT
NOTES
Once the countdown has begun, you can
press
camcorder to cancel the self timer.
: Set the camcorder to record
[ MENU]
CAMERA SETUP]
[
FUNC.
to close the menu.
appears.
cancel the self timer.
Start/Stop
on the camcorder to
video ( mode) or takes a
still image (
a 10-second countdown. The
countdown appears on the screen.
( mode) or
( mode) on the wireless
controller. In that case, the
countdown will be only 2 seconds.
Start/Stop
again or turn off the
( 22)
ON ]
OFF] to
mode) after
START/STOP
PHOTO
• 41
Video