Scanning An Image From An Application - Canon imageCLASS MF3110 Software Manual

Scanning an Image from an Application

You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant
application and use the image in that application.
This procedure varies depending on the application. The following is only one
example. For the correct procedure, refer to the documentation of the application
you are using.
3
1
Place the document face-down on the platen glass.
2
Open the application from which you will scan the document.
3
Select the command to scan.
In most cases, select [Import] or [Acquire image] etc. from the [File] menu.
4
Select the scanner driver to be used.
With Windows XP, you can use the ScanGear MF or the WIA driver as the scanner
driver.
To use ScanGear MF, select [Canon MF3110].
To use the WIA driver, select [WIA-Canon MF3110].
5
Specify the scanner settings ➞ click [Scan].
For details, see "Setting Preferences and Scanning with ScanGear MF," on p. 3-18, or
"Scanning with the WIA Driver (Windows XP Only)," on p. 3-43.
When scanning is completed, the scanned image will appear in the application's
display area.
NOTE
If white lines appear on one edge of the scanned image, check that the document is
correctly placed on the platen glass. A document should be placed approximately
mm) from the front edge (i.e., the edge closest to the control panel) of the platen glass.
3-14 Scanning an Image from an Application
1
/ " (3
8