Setting Preferences And Scanning With Scangear Mf; Switching Between Simple Mode And Advanced Mode - Canon imageCLASS MF3110 Software Manual

Setting Preferences and Scanning with ScanGear MF

With ScanGear MF, you can review with the preview image (provisional scan) how
the final image will be scanned and make detailed adjustments for the size and
color of the image. If the preview image is satisfactory, you can then scan the
document properly.
If you wish to make settings with ScanGear MF when scanning a document, you
can either check the [Use the Scanner Driver to Make Advanced Settings]
3
checkbox in the MF Toolbox before scanning, or scan from an application.
NOTE
If you are scanning from an application in Windows XP, select ScanGear MF in the
application before scanning. For details, see "Scanning an Image from an Application,"
on p. 3-14.

Switching between Simple Mode and Advanced Mode

ScanGear MF has two modes: [Simple Mode] and [Advanced Mode]. With
[Advanced Mode] you can perform detailed settings such as resolution and
contrast.
To switch between two modes, click the corresponding tab.
[Simple Mode] dialog box
3-18 Setting Preferences and Scanning with ScanGear MF
[Advanced Mode] dialog box