Table of Contents
Advertisement
If you want to define your own paper size, select Custom. Then, in the
Custom Paper Size dialog box, specify the width, height, and unit
measure for the size.
Orientation
Click the orientation to determine how your document is printed on
the page: Portrait to print the contents of your document vertically on
the page, or Landscape to print the contents of your document
horizontally on the page.
Printing a Banner
Although your MultiPASS printer is capable of printing a banner, there are
some limitations to the banner printing feature. These limitations are as
follows:
The MultiPASS printer cannot print on the first sheet of banner paper.
As a result, when printing, you must always allocate one sheet more
than the length of your actual banner.
The banner can be a maximum of five actual printed pages (for a total
of six pages, including the first sheet on which the banner cannot be
printed).
To prepare your MultiPASS printer for banner printing:
1. Make sure the paper rest is extended.
2. Make sure the paper thickness lever is set to the left.
3. Insert the banner paper into the printer. Make sure that you insert the
first page so that the fold between the first and second pages is facing
up.
4. Verify that the side of the paper that is facing up is the side on which
you want the banner to appear.
5. Raise both paper output guides to a vertical position.
3-20 Printing with the MultiPASS Printer
Chapter 3
Advertisement
Chapters
Table of Contents
