Safety And Compliance Guidelines; Qualification Of Personnel; Personal Protection; General Safety Guidelines - NEC FA Series Quick Start Manual

2. Safety and Compliance Guidelines
Read the instruction manuals carefully and follow the given instructions and safety
information thoroughly.
The operating safety of the system is only ensured through its proper use.
Only operate the system with supplied accessories and tools.
2.1 Qualification of Personnel
Only authorized and qualified technical personnel can perform the installation.
Only personal qualified by NEC DISPLAY SOLUTIONS and/or respectively authorized
personal may carry out repairs, service and maintenance work on the system. A
case of service occurs as soon as one component is damaged in any way, is not fully
functional any more.
Only trained personnel, such as electricians or NEC personnel, may connect the
internal power supply to mains power supply.
2.2 Personal Protection
Electric shock hazards.
Follow the relevant legal electric requirements of the country, where the system
will be operated, as well as the existing regulations of the operator, such as work,
operating and safety regulations.
2.3 General Safety Guidelines
Risk of electric shock or fire due to high-voltage components.
• Do not expose this unit to rain or moisture.
• Do not submerge this unit partially, or completely in water, or liquids.
• Do not use this unit's polarized plug with an extension cord receptacle or other
• Do not open the cabinet because of the high-voltage components inside. There are
• Only qualified service personnel are allowed to service and open the unit.
Risk of electric shock.
• If not in use, fully disengage the power to the unit by disconnecting the power cord
• Do not use damaged cables. Check cables regularly. Replace damaged cables
Warning
!
Warning!
outlets unless the prongs can be fully inserted.
no user-serviceable parts are inside.
Caution!
from the AC outlet.
immediately, they are not user-serviceable.
6