❷ Making Connections; Enabling The Computer's External Display; Connecting Your Pc Or Macintosh Computer - Canon LV-7370 User Manual

❷ Making Connections
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby
mode and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered
up.
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power man-
agement software.

Enabling the computer's external display

Displaying an image on the notebook PC's screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the 'Fn" key along with one of the 12 function keys gets the external display to come
on or off. For more details, refer to your computer's owner's manual.

Connecting Your PC or Macintosh Computer

NOTE: Signals supported by Plug & Play (DDC2)
Model
LV-7375/LV-7370/LV-7275
LV-8300
Vga cable (supplied)
to mini d-sub 15-pin connector on the
projector. it is recommended that you use
a commercially available distribution am-
plifier if connecting a signal cable longer
than the cable supplied.
• Select the input name for its appropriate input connector after turning on the projector.
Input connector
ANALOG IN-1
ANALOG IN-1
analog
Yes
Yes
ANALOG IN-1
PHONE
iBM Vga or Compatibles (notebook
type) or Macintosh (notebook type)
Use the INPUT button on the projector cabinet or the remote
control to select the appropriate input from the menu.
AUDIO IN
INPUT
DIGITAL IN / ANALOG IN-2
analog
No
Yes
AUDIO IN
audio cable
(not supplied)
NOTE: For older Macintosh, use a commercially avail-
able pin adapter (not supplied) to connect to your Mac's
video port.
Computer 1
DIGITAL IN/
ANALOG IN-2

. Installaton and Connectons
digital
Yes
Yes
PHONE