Using The Cleaning Cloth - Miele PRI 210 Operating Instructions Manual

Using the cleaning cloth

Use the cleaning cloth for cleaning the heater plate.

Since the cleaning cloth is narrower than the heater plate, you cannot clean the entire
heater plate width by feeding the cloth through once. You need to feed the cleaning cloth
through the ironer several times, and move it from side to side.
Tip: You can loosen incrustations such as starch residues by feeding a cloth soaked in
lukewarm water through the ironer first.
a
Pocket
b
Cleaning strip
Lay the cleaning cloth on the left side of the feed table with the cleaning strip facing the

heater plate.
Feed the cleaning cloth evenly and straight from the left side of the infeed table through

the ironer until it comes all the way out on the other side.
The cleaning strip loosens the soiling. The softer cotton strip removes the soiling and pol-
ishes the heater plate.
Feeding the cleaning cloth through the ironer from the left to the right side
Now lay the cleaning cloth back on the feed table, but this time move it slightly to the

right. The cleaning strip must again face the heater plate.
Feed the cleaning cloth through the ironer again.

Repeat the process until you reach the right side of the feed table and the entire width of

the heater plate has been cleaned.
Press the  button to end the cleaning programme.

1 .
2 .
3 .
en - Cleaning and care
①
②
③
c
Cotton strip
183