Using The Cleaning Cloth - Miele PRI 210 Operating Instructions Manual

Cleaning and care

Using the cleaning cloth

Use the Miele cleaning cloth for cleaning the heater plate.

As the cleaning cloth is narrower than the heater plate, the entire plate cannot be cleaned
in one go. It is necessary to feed the cleaning cloth through the ironer several times,
gradually moving it down the width of the heater plate.
Useful tip: Stubborn soiling such as starch deposits can be removed by passing a cloth
soaked in lukewarm water through the ironer.
a
Pocket
b
Cleaning strip
Place the cleaning cloth on the left side of the infeed table so that the cleaning strip

faces towards the heater plate.
Feed the cleaning cloth evenly into the ironer from the left side of the infeed table until it

has passed all the way through the ironer.
The cleaning strip helps to lift the soiling. The softer cotton strip removes the soiling and
polishes the heater plate.
Feeding the cleaning cloth through the ironer from left to right
Place the cleaning cloth on the infeed table again, this time slightly further to the right.

The cleaning strip must face the heater plate.
Feed the cleaning cloth through the ironer again.

Repeat the process until you have arrived at the right side of the infeed table and have

cleaned the entire width of the heater plate.
Press the  sensor to end the cleaning programme.

34
1 .
2 .
3 .
①
②
③
c
Cotton strip