Cleaning And Care; Heater Plate Maintenance; Starting The Cleaning Programme - Miele PRI 210 Operating Instructions Manual

Heater plate maintenance

Regular heater plate maintenance is essential for protecting the roller drive and the roller
cover. Please follow the notes in the Miele Ironing Handbook on ironing and cleaning and
care. The heater plate must be waxed every time it is cleaned. Failure to do so can result in
a considerable reduction of the lifespan of the flatwork ironer.
The heater plate is made of aluminium.
Coarse-grained scouring agents or abrasive cleaning cloths must not be used for
cleaning aluminium heater plates.
For optimum results, we recommend using the Miele cleaning set. The cleaning set
contains a cleaning cloth, a waxing cloth, and ironing wax. The set is available to order
as an optional accessory.
Detergent and starch deposits can stick to the heater plate. It should therefore be cleaned
before starting work, depending on the degree of soiling.
When the red indicator symbol  lights up, it is necessary to run the cleaning
programme to clean and wax the heater plate.

Starting the cleaning programme

Press and hold the  sensor for more than 3 seconds.

The cleaning programme is started. 80 °C is shown in the display.
If the current temperature of the ironer is higher than 80 °C, the  symbol appears and
the ironer is cooled down.
The cleaning process can be started when the  sensor is flashing.
Press the flashing  sensor to start the ironer in the cleaning programme.

The ironer can then be cleaned using the cleaning cloth.

Cleaning and care

33