Notes
Fault messages
When a fault occurs, ironing is paused, the sensor flashes, and a four-digit code appears
in the display. Pressing the flashing sensor cancels the fault (the fault is stored in the fault
memory). The sensor flashes and ironing can be restarted.
Fault code
Fault
Heater fault
Electronic fault
Drive fault
Fan fault
Electronic fault
Appliance locked
Drive voltage too low
General compressor fault
Low voltage
–
Control system fault
If the fault message appears again, repeat the procedure or switch the ironer off and back
on. If the fault persists, please call Miele Professional Service.
In the event of a malfunction, please call Miele Professional Service.
32