Changing The Value For A Temperature Selection Sensor; Selecting The Ironer Speed - Miele PRI 210 Operating Instructions Manual

Changing the
value for a
temperature
selection sensor
Selecting the
ironer speed
Press the temperature selection sensor you want to change the

value for.
Keep it pressed in. The bar will light up underneath it and the current
temperature value will appear in the display.
Press the  or – sensor to set the temperature you want to save

for that sensor.
Then press and hold the selected temperature selection sensor until

it flashes once.
The temperature value is now saved for that temperature selection
sensor.
PRI 210/214:
Symbol Speed range
Low speed range

Medium speed range

 High speed range
PRI 217:
Symbol Speed range
Low speed range

Medium speed range

 High speed range
Speed selection sensors
The roller speed can be set either via the spin speed selection
sensors (//) or alternatively via the  and – sensors.
Operation
m
/
min
1.5–2.2
2.3–3.2
3.3–4.0
m
/
min
1.5–2.4
2.5–3.4
3.5–4.5
17