Xcdi+Rx Interface - Bosch Rexroth IndraControl VDP 16.3 Project Planning Manual

40/57
Interfaces
XVID and XSER Assignment
XVID and XSER marking
7.1.6

XCDI+rx interface

Bosch Rexroth AG R911323862_Edition 07
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Dis‐
NOTICE
The identification of the display resolution is only active once after switching
on the control cabinet PC. Consequently, if a VDP is plugged and then
removed or if a VDP is connected when starting the control cabinet PC, only
a VDP with the same resolution can be connected again. Thus, it is ensured
that the screen output at the connected VDP is executed automatically
without changing the screen output to the VDP via keyboard.
NOTICE
Use only cables listed in chapter 11 "Ordering information" on page
All connections of the XVID and XSER interface are assigned.
For information on the cable lengths related to the display resolution, refer to
the operating instructions of the Y-repeater R911336973.
The CDI interfaces are color-coded on the device:
CDI interface, data (XSER)
CDI interface, image (XVID)
Tab. 7-3: Color-coding of the interface
NOTICE
To clearly identify cables, label them, e.g. with cable markers or clips.
The CDI+ interface includes the data interface as well as the image transfer.
Connect the control cabinet PC to the operating display using the ready-
made cables (see chapter 11.5.5 "Connecting cables for CDI interface" on
page 50) available as accessory.
Screen output interference due to VDP
device exchange at runtime if the resolution
of the exchanged device is different.
Malfunctions caused by using inappropriate
cables.
Violet
Black
Breakdown of the operation due to incorrect
cables.
play
47.