Kenwood NEXEDGE NX-57 Series Installation Manual page 17

Table of Contents

RadioPro IP Gateway

Configure Data settings & Target/Base ID settings.

Expand the

Features.

If using FleetSync on a conventional (non-trunked) system, use the

correct data will be sent to the Data Channel:

i. Specify the channel to use for data by assigning the

ii.

iii. Enter a value For

Installation and Configuration Guide NEXEDGE NX-57xx/58xx

Personal

folder, expand the

required for your system.

Enable the desired messages

Target Fleet

Note: If the target does not include the Control Station(s), data will not appear in

System 1

folder under that, and then select

Data Zone-Channel (Analog)

to send across the Data Zone-Channel with a Check.

Target

ID.

and

Personal

Analog

section to ensure that the

RadioPro.

field as

Table of Contents