Kenwood NEXEDGE NX-57 Series Installation Manual page 8

RadioPro IP Gateway
2. Configure NXDN and FleetSync System
a. Expand the
Information.
b. In the System Information window, for System Type select
Type select FleetSync.
In the ID (FleetSync) box, enter a value for
c.
(Note: These parameters do not have to be used elsewhere, but they must have an assigned value even if
the radio is being used in analog mode without FleetSync, or in digital mode with NXDN. Not entering an
ID will prevent RadioPro from functioning properly.)
In the Unit ID box, enter a value for
d.
(Note: This parameter does not have to be used elsewhere, but it must have an assigned value even if the
radio is being used in analog mode without FleetSync. Not entering an ID will prevent RadioPro from
functioning properly.)
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
Personal folder, expand the
Unit
System 1 folder under that, and then select
NXDN Conventional, and for Signaling
Fleet (Own) ID (Own).
and
ID.
8
System