Handling and operation
Switching the appliance on and off
♦
Plug the appliance into a suitable, easily accessible mains socket.
The operating LED 2 lights up red to show that the appliance is
in standby mode.
♦
Press the button 1 to turn on the fan heater. The factory
preset temperature
♦
Press the
standby mode. The display 3 goes out, while the operating
LED 2 remains lit up red. The fan runs on a while to cool the
appliance down.
♦
To switch off the appliance completely, disconnect it from the
mains power supply. To do this, remove it from the mains socket.
WARNING
►
The fan heater gets very hot during use. Allow it to cool down
before you disconnect it from the mains socket. Touch the heater
only by the recessed grips 8 provided.
SSH 600 A1
(25° Celsius) appears on the display 3.
button 1 again to switch the fan heater back into
GB │ MT
│
85
■