Initial Operation; Switching The Product On/Off; Switching The Led Light On/Off; Mode Selection - Silvercrest SKR D1 B2 Operation And Safety Notes

˜ Initial operation
You can also set up the product on a level
surface . So as not to cover the ventilation
slots and loudspeaker
the product, you must fold out the adjustable
foot of the product .
[ 13 ]
Connect the power adaptor
socket and a suitable socket-outlet . The
[ 11 ]
product enters standby mode . The time is
constantly displayed .
˜ Switching the product on/off
Press to switch the product on/off
[ 3 ]
(off = standby mode) .
˜ Switching the LED light on/off
Switching the LED light on: Briefly press
button .
5 ] [
Switching the LED light off: Briefly press
button again .
[ 5 ]
NOTES:
The LED light is located underneath the
14 ] [
product .
If the LED light is not switched off
14 ] [
manually, it will switch off automatically after
120 minutes .
14 GB/IE/NI/CY
on the bottom of
15 ] [
to the power
20 ] [
˜ Mode selection
In power on mode, press MODE
select from the following modes: FM or DAB .
˜ Volume adjustment
Increase volume: Turn VOLUME/START/
RESET
in a clockwise direction .
[ 7 ]
Reduce volume: Turn VOLUME/START/
RESET
in a counter-clockwise direction .
[ 7 ]
˜ System settings
Press and hold MENU/INFO
the menu .
Turn SELECT/ENTER/SNOOZE
<SYSTEM> .
Push SELECT/ENTER/SNOOZE
confirm .
Turn SELECT/ENTER/SNOOZE
from:
shortly to
2 ] [
to display
8 ] [
to select
1 ] [
to
1 ] [
to select
1 ] [