Philips Allegiant LTC 8500 Series Instructions For Use Manual page 74

Error 58 - SEQUENCE request
The sequence being requested is a relative
sequence, and the user is only allowed access to
absolute sequences.
Error 60 - PROGRAM request
The user has tried to program a sequence that is
currently running. The sequence must first be
stopped before any editing can be performed.
Error 62 - PROGRAM request
The user has tried to program a new sequence when
the system is out of sequence memory space. Delete
unused sequences and then program the new
sequence.
Error 63 - PROGRAM request
Some other user is already programming a sequence
on this monitor.
Error 70 -
Monitor not allocated to alarm monitor group
This monitor can not be used for alarm operations; it
has not been designated as alarm-capable by the
system programmer.
Error 71 - Step monitor required
A group of alarm monitors may not have an armed
Review (display) monitor without having armed Step
(sequence) monitors.
Error 78 - Must enter alarm number
A specific alarm number must be entered when
arming or disarming an alarm.
Error 80 - Trunk not available
An attempt was made to access a remote camera
connected to a satellite system, but no unused trunk
lines are currently available.
Error 89 - internal stack error
A stack overflow within the system has occurred.
Report this to the manufacturer.
Error 90 - Keyboard entry undefined
The keyboard entry is not defined. Check the
appropriate section of the instruction manual for the
desired operation and try again.
Error 92 - Keyboard entry out of range
The data entered for a valid command was not in the
range allowed by the system. Check the appropriate
section of the instruction manual for the acceptable
ranges for the command in question and try again.
Error 94 - Keyboard entry invalid
An invalid character has been received from the
keyboard. Usually
communications error. Verify that the keyboard-to-
system cable is not producing an intermittent
connection.
Error 95 - Keyboard entry incomplete
The control sequence sent from the keyboard was
incomplete. Usually
communications error. Verify that the keyboard-to-
system cable is not producing an intermittent
connection.
Error 96 - * (STAR) undefined
The * key has been pressed, but there is no definition
for this button.
72
this would indicate
this would indicate
a
a