Kick Starter; Seat - Yamaha Fazer Owner's Manual

Colorprofile:GenericCMYKprinterprofile
CompositeDefaultscreen
INSTRUMENT AND CONTROL FUNCTIONS
1
1.

Kick starter

Kick-starter
Raise the right Pillion footrest, and
rotate the kick starter away from the
engine. Push the kick starter down
lightly with your foot Kick until the
gears engage, then kick smoothly and
forcefully to start the engine. This
model has a primary-coupled kick
starter so the engine can be started in
any gear if the clutch is disengaged.
However, shifting to neutral before
starting is recommended.
ALWAYS USE A HELMET WHILE RIDING FOR YOUR SAFETY
D:\Chapt3.cdr
Saturday,October01,20051:01:05PM
1. Open (Bolt - 1 No.)
2. Open (Bolt - 1 No.)
Opening of Seat
To remove
Open side panels as per instructions
on page 6-5.
Remove the two bolts 1 and 2 as
shown in figure. Lift the front of the
seat and slide forward to remove.
3-8
8
2
1
1. Seat Holder
2. Projection
To install
Insert the projection on the rear of
seat in to seat holder. Then push
down on front of the seat and tighten
the bolts on the left and right hand
side of the seat.