Colorprofile:GenericCMYKprinterprofile
CompositeDefaultscreen
1. Indicator Screw (1 No.)
Turn signal and taillight
bulb replacement
1. Remove the screw and the lense.
2. Push the bulb inward and turn it
counterclockwise.
3. Place a new bulb in the socket.
Push the bulb inward and turn it
clockwise until it engages into the
socket.
4. Install the lense and the screw.
Chapt6_c.cdr
Saturday,October01,20051:05:30PM
PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
1. Integral Tail lamp
with Indicators
CAUTION :
Do not over-tighten the screws as
the lense may break.
6-29
5
Front wheel removal
WARNING
•
It is advisable to have a
YAMAHA dealer
wheel.
1
•
S e c u r e l y s u p p o r t t h e
Motorcycle so there is no
danger of it falling over.
Screws
(2
Nos)
service the