Table of Contents
Advertisement
10. MODE (Color mode selection)/Green
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB→
HIGH ILLUMINANCE → Media Player → STD...
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
• sRGB is for DVI-D, HDMI[PC], and D-SUB[RGB] input only.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal's characteristics and represents color tone
close to its original image.
nSwitching the screen size
Even when the screen size is changed, the display may remain the same depending on the input signal.
NORMAL
WIDE
Dot by Dot
TIPS
• Using this monitor's screen-size switching to compress or expand the screen for commercial or public viewing in
establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be
careful.
• When "Enlarge" is set, the screen size is fixed to WIDE mode.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When a 4:3 image is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the
image may be lost or appear distorted. If you wish to respect the creator's intentions, set the screen size to NORMAL.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.
Caution
• When the input mode is [Media Player], operations 3, 4,
5, 8, 9, and 10 cannot be performed. Change an input
mode to other than Media Player before performing these
operations. COLOR MODE, VOLUME and SIZE can be
changed while a file in a USB flash drive or an SD memory
card is being played. (See page 25.)
TIPS
SIZE
• 8
file in a USB flash drive or an SD memory card and when
entering text. Colors and operation names appear in the
screen.
Displays image so it fills the screen without changing the aspect ratio of the input
signals.
Displays image so it fills the entire screen.
Displays the dots of the input signals as the corresponding dots on the screen.
DISPLAY
MODE
, 9
, and 10
are also used when playing a
Basic Operation
21
E
Advertisement
Table of Contents
