Table of Contents
Advertisement
You can play image, video, and audio files in media (USB
flash drive or SD memory card) that is connected to the
monitor.
For information on USB flash drive, see page 12.
For information on SD memory card, see page 13.
Caution
• A USB flash drive and SD memory card cannot be
connected simultaneously.
Auto playback
The image files or video files in a USB flash drive or an SD
memory card can be automatically played.
Create a folder with the name "autoplay" in the top level of the
USB flash drive or the SD memory card.
Files in the "autoplay" folder that meet the criteria below play
automatically. (Supported formats and file names are different
from other playback.)
Format
File name
Number of files
*1 For details, see "Supported formats" (see page 26).
*2 File extension must be in lowercase.
Caution
• Mixed playback of image files and video files is not
possible. To display a mix of image files and video files, see
"SCHEDULE" (see page 33).
TIPS
• During auto play, it is better to turn the power ON/OFF using
the remote control unit. When the power is turned ON/OFF
using the main power switch, it takes a longer time until
auto play is started. It also takes a longer time for playback
to start from POWER SAVE MODE and ON.
• The displayed screen size is as follows:
Image: NORMAL
Video: Screen size of input mode before auto play*
* To have auto play always play at the same size, set the
screen size of each input mode to the same size.
22
E
Playing the Files in a media
Image files : *.jpg *
1
or
Video files : *.wmv *
1
001.jpg - 030.jpg *
2
or
001.wmv - 030.wmv *
2
(Files are played by number in ascending
order. If a number is missing in the
sequence, that number is skipped.)
Up to 30.
n Preparations
Set the type of files for auto play.
1. Change an input mode to other than [Media Player].
(See page 20.)
MENU
2. Press
and select SETUP with
ENTER
3. Press
and select AUTO PLAY with
ENTER
4. Press
and select PHOTO or MOVIE with
ENTER
5. Press
.
MENU
6. Press
.
n Auto playback of files
1. Connect a media to be played (the USB flash drive or
the SD memory card) (see pages 12,13) and turn the
power ON. You can connect a media to be played (the
USB flash drive or the SD memory card) (see pages
12,13) after turning the power ON.
TIPS
• Auto play will not start if a folder, file format, or file name
indicated in "Auto playback" is not correctly set, and if AUTO
PLAY is not correctly set in the SETUP menu.
n To stop auto play
1. Press
INPUT
.
or
.
or
.
or
.
Advertisement
Table of Contents
