Hanging The Luminaire - Philips VL6000 Quick Start Manual

Hanging the Luminaire

The VL6000 Beam Luminaire can be hung horizontally or vertically from any structure designed to work with the type of load created by this
moving luminaire. Two mounting truss hooks or other mounting hardware are required. Many compatible truss hooks are available from
different manufacturers for your particular needs.
A minimum of two hooks per luminaire is required. If mounting method does not use truss hooks, two attachment points, per luminaire, are
required.
Install mounting hardware and brackets:
Step 1. Install truss hooks on two provided truss hook brackets as
required as shown in Figure 9.
Note: Various types of truss hooks can be used. The Mega Claw truss hook
(as shown in the example above) as well as many other standard hooks, can
be ordered separately.
Step 2. Determine required configuration of bracket installation.
Brackets may be installed in many different orientations as
shown in Figure 10.
Step 3. While pulling up on locking mechanism release, fit keyed
holes onto raised mounting buttons at bottom of enclosure.
Slide forward and release locking mechanism to lock in
place. Ensure brackets are locked securely.
WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the luminaire. AVERTISSEMENT:
Assurez-vous que le mécanisme de support de verrouillage est complètement inséré après le support est installé sur l'appareil.
Bracket
Orientation
Brackets
Example Bracket
Orientations
0 2. 9708.0001
VARI❋LITE - VL6000 B
Example Truss Hook and Mounting Hardware (not included, sold separately)
Mount Bracket*
Raised Mounting Buttons (8 each)
Fit bracket's keyed hole and locking mechanism
over raised mounting buttons and slide forward
to lock.
Locking
Mechanism
Keyed Hole
Figure 10: Installing Brackets on Luminaire Enclosure
27 A p r il 2 0 1 7
L
EAM UMINAIRE
Mega Claw Truss Hook
(not provided)
Mount Bracket
Example Truss
Hook Installation
Truss Hook Hardware
(not provided)
Figure 9: Truss Hook Installation
Locking
Mechanism
Mount
Bracket
Press up to
install or release
Q S G
UICK TART UIDE
Locked
1 2