Panasonic NA-127VC6WFR Service Manual page 30

11.6. Motor
The washing machine has an asynchronous motor. It is
controlled by the PCB. It is essential to check the motor for
correct diagnosis and quick servicing. In the below picture,
socket points on the motor is shown to measure with
multimeter.
Tacho resistance control
Check the motor tacho terminals on the motor socket with
multimeter as shown in the picture above.
You can determine the ohm value by measuring from the pink
cable at 16th and red cable at 6th position in the large socket
(refer to section 12 Wiring Connection Diagram) as shown on
right figure. For resistance values, refer to the table below.
Stator Resistance Control
Check the motor stator terminals on the motor socket with
multimeter as shown in the picture.
You can determine the ohm value by measuring from the
black cable at 18th and brown cable at 8th position in the
large socket (refer to section 12 Wiring Connection Diagram)
as shown on right figure. For resistance values, refer to the
table below.
MOTOR CODE
AXW401-13066
Motor socket terminals
Testing components
Tacho and stator resistance values of motor:
SUPPLIER STATOR (Ω)
ANAIMEP 1,20 ± 7% Ω
30
Motor
Tacho terminals
Strator Terminals
TACHO (Ω) TEMPERATURE
180 ± 7% Ω 20°C