4.3 Network
TCP/IP
4.3.1
The TCP/IP interface is shown as in Figure 4-14
Please refer to the following sheet for detailed information.
Parameter
Host Name
Ethernet Card
Mode
MAC Address
Figure 4-94
Function
It is to set current host device name. It max supports 32-digit
character.
Please select the Ethernet port. It is for the wire LAN by default.
There are two modes: Static mode and the DHCP mode.
The IP address/subnet mask/gateway are null when you
select the DHCP mode to auto search the IP.
If you select the static mode, you need to set the IP
address/subnet mask/gateway manually.
If you select the DHCP mode, you can view the IP
address/subnet mask/gateway from the DHCP.
If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.
It is to display host MAC address.
39