Panasonic K-EW114L03AE Operation Manual page 60

Parameter
Sensitivity
Threshold
Waveform
Delete All
Delete
4.4.1.2 Tampering
The tampering interface is shown as in Figure 4-29 and Figure 4-30.
Function
It is sensitivity of brightness as VMD is more possible to be
trigger with high sensitivity. You can set up to four areas. The
range is 0 - 100. The recommenced value is 30 - 70. The default
is 60.
It is to check target object area related to detection area. The
lower the area threshold, the easier to trigger VMD. You can set
up to four areas. The range is 0 - 100. The recommenced value
is 10 - 50.
Red means motion detect is triggered. Green means motion
detect is not triggered.
Clear all areas.
Delete selected area.
Figure 4-29
56