Table of Contents
Advertisement
11 Follow the instructions from step 9 to step 14 in "Removing the Top
Cover" on page 83.
12 Turn the top-cover assembly over.
13 Remove the heat sink (see "Removing the Heat Sink" on page 105).
CAUTION:
and the processor when removing or replacing the processor, press to apply slight
pressure to the centre of the processor while turning the cam screw.
CAUTION:
perpendicular to the processor when turning the cam screw.
14 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the
ZIF-socket cam screw counterclockwise until it comes to the cam stop.
112
Processor Module
To prevent intermittent contact between the ZIF-socket cam screw
To avoid damage to the processor, hold the screwdriver so that it is
1
2
4
3
Advertisement
Table of Contents
