1
screw
3
base cover
Replacing the Optical Drive
1 Follow the instructions in "Before You Begin" on page 9.
2 Slide the optical drive into the optical-drive bay until it is fully seated.
3 Replace the screw that secures the optical drive to the base cover.
4 Replace the module cover (see "Replacing the Module Cover" on page 16).
5 Replace the battery (see "Replacing the Battery" on page 14).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
34
Optical Drive
1
2
Before turning on the computer, replace all screws and ensure that no
2
optical drive
3